USING LIQUID CRYSTALS IN HEAT TRANSFER APPLICATIONS

  • İbrahim Koç
Keywords: Liquid Cyrstal, Film Cooling, Film Cooling Effectiveness

Abstract

This paper deals with the application areas of liquid crystals, their functional principles and the utilization of the liquid crystal technique in heat transfer applications. The temperature and the characteristics of heat transfer are determined by using liquid crystals. In this study, the temperature region for film cooling, which is a method of gas turbine blade and vane cooling, was developed by using liquid crystals as an application and the film cooling effectiveness was calculated.

References

[1] http://www.baybul.com/bilim-genel/69363-sivi-kristal-ekranlar-nasil-goruntu-uretiyor-ve-nerelerde-kullaniliyor.html?langid=3
[2] Ayachit, N.H., Vasan, S.T., Sannaningannavar, F.M. and. Deshpande, D.K., “Thermodynamic and acoustical parameters of some nematic liquid crystals”, Journal of Molecular Liquids, Vol.133 pp.134–138, 2007.
[3] Park, S., Kim H-K, Hong, J.W., “Investigation of the photopolymerization-induced phase separation process in polymer dispersed liquid crystal” Polymer Testing, Vol.29, pp.886–893, 2010.
[4] Farino, D. J., “Making Surface Temperature Measurements Using Liquid Crystal Thermography”, Electronics Cooling, vol.1, no.2, pp.10-15, 1995.
[5] Bakırcı, K., “Sıvı Kristal Metoduyla Isı Transferi Hesabı” Termodinamik, Sayı 132, Ağustos 2003.
[6] Sargison, J.E., Guo, S.M., Olfield, M.L.G. and Rawlinson, A.J., “The Variation of Heat Transfer Coefficient, Adiabatic Effectiveness and Aerodynamic Loss With Film Cooling Hole Shape”, Heat Transfer In Gas Turbine Systems, Annals of The New York Academy Of Sciences 934, 2001, pp. 361-369.
[7] Ekkad, S.V. and Han, J.C., “A Transient Liquid Crystal Thermography Technique for Gas Turbine Heat Transfer Measurements” Measurement Science and Technology, Recived: February 2000.
[8] Wagner, G., Vogel, G., Chanteloup, D. and Bolcs, A., “Pressure Sensitive Paint (PSP) and Transient Liquid Crystal Technique (TLC) for Measurements of Film Cooling Performances”, The 16th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascade and Turbomachines, Cambridge, UK, September 2002.
[9] Ashforth-Frost, S. and Rüdel, U. W. “Thermal and Hydrodynamic Visualisation of a Water Jet Impinging on a Flat Surface using Microencapsulated Liquid Crystals, International Journal of Fluid Dynamics, Vol.7, Article 1, 2003.
[10] Koç, İ., Islamoglu, Y and Akdag, U., “Investigation of film cooling effectiveness and heat transfer coefficient for rectangular holes with two rows”, Aircraft Engineering and Aerospace Technology, Vol.81/2, pp.106–117, 2009.
[11] Gerçek, E. ve Panayır, O., “Binek Taşıtlarda Ön Cam Buzlanmasının Önlenmesinde Yeni Bir Yaklaşım”, Bitirme Tasarım Projesi, Mayıs, 2002.
[12] TS-1423, 1975. Akışkan Verdisinin Orifis Plakalar ve Lüleler(Nozul) ile Ölçülmesi, Türk Standartları Enstitüsü, Ankara.
[13] Goldstein, R.J. and Eckert, E.R.G “Effect of hole geometry and density on three dimensional film cooling”, Int. J. Heat Transfer, Vol.17, pp. 595-607, 1974.
Published
2012-01-23
How to Cite
[1]
İbrahim Koç, “USING LIQUID CRYSTALS IN HEAT TRANSFER APPLICATIONS”, JAST, vol. 5, no. 3, pp. 61-65, Jan. 2012.
Section
Articles